EN
Configure
Installation boxes · for installers

Hot water cylinder installation box for electric and district-heating cylinders.

The installation box for the hot water cylinder brings the water connections and waste into the wall ready-piped, for electric cylinders with an electrical conduit: an XPS insulating body with the pipe foamed in. SANOOX makes it in 15 versions for masonry and drywall, for 31 pipe systems.

ConfigureExplore models
SANOOX hot water cylinder installation box M09.1480 for an electric cylinder, pink XPS box with two wall-plate elbows, DN 30 waste bend, pipes and empty electrical conduit pointing down

Installation boxes for hot water cylinders

15 boxes · dimensions in mm, drawings schematic
Hot water cylinder · from the field

Questions about the hot water cylinder connection.

Short answers to what matters before you order. If anything is still unclear, the box assistant or our office in Pöllau can help.

ConfigureContact
What is an installation box for the hot water cylinder?

A factory-piped XPS insulating body that brings the water connections and waste for the cylinder ready into the wall, for electric cylinders with an empty conduit. SANOOX makes it in 15 versions for masonry and drywall.

Is the electrical conduit included?

Yes, on all boxes for the electric cylinder, including those with a washing machine connection.

Which district-heating cylinders are there boxes for?

For Thermograf and Austria Email FSN110/FSN140, FSV110/FSV140 and FSV110/FSV140-2WZ, each for masonry and drywall.

Which drain layout is prepared in the Hot water cylinder installation box?

Ein 87.5° bend or trap bend DN 30, 40 or 50, matched to the drainage programme on site: Geberit Silent PP, Pipelife Master 3 or Polokal PK. The programme is the last digit of the article number. On box shapes with an additional washing machine trap, the programme is likewise encoded in the article number. There are also boxes with a built-in washing machine trap, drain DN 50; no drain code appears in the article number.

Is there a box for the gas boiler?

Not in the current catalogue. Please ask SANOOX.

How deep is the hot water cylinder installation box?

70 mm. The electric cylinder boxes for masonry are also available 50 mm deep with option 00199.

What pipe size does the Hot water cylinder installation box use?

20 mm. PP pipe (Aquatec, Harreither and Kelit Kelen) is available only in 25 mm.

How is the article number structured?

It is built from Box, Pipe system, Dimension and Drainage programme. Example M09.1480.22.20.1: Box M09.1480 (Elektrospeicher kurz, Massivbau), Pipe system 22 (Viega Raxofix), 20 mm, Drainage programme 1 (Geberit Silent PP). The configurator shows the finished number.

Where do I order the Hot water cylinder installation box?

Through your plumbing and heating merchant, using the full article number; SANOOX does not supply end customers. Build project lists in the configurator and send them to SANOOX as an enquiry.

Hot water cylinder connection: dimensions per box

BoxVersionW × H × D (mm)Pipe (mm)
M09.0640MasonryElectric water heater, long, with electrical conduit for water heater, pipes exit at the bottom, long pipes170 × 1250 × 7020/25
M09.1480MasonryElectric water heater, short, with electrical conduit for water heater, pipes exit at the bottom, long pipes170 × 290 × 7020/25
M09.0650MasonryElectric water heater and washing machine, long, with electrical conduit for water heater, pipes exit at the bottom, long pipes300 × 1250 × 7020/25
M09.0660MasonryElectric water heater and washing machine, long, with electrical box, electrical conduit for water heater, pipes exit at the bottom, long pipes420 × 1250 × 7020/25
M09.0670MasonryDistrict heating cylinder, long, Thermograf, pipes exit at the bottom, long pipes420 × 1250 × 7020/25
M09.0680MasonryDistrict heating cylinder, long, Austria Email - FSN110/FSN140, pipes exit at the bottom, long pipes420 × 1250 × 7020/25
M09.0690MasonryDistrict heating cylinder, long, Austria Email - FSV110/FSV140, pipes exit at the bottom, long pipes420 × 1250 × 7020/25
M09.0700MasonryDistrict heating cylinder, Austria Email - FSV110/FSV140 - 2WZ, pipes exit at the bottom, long pipes420 × 1250 × 7020/25
T09.2445DrywallElectric water heater, short, with electrical conduit for water heater, pipes exit at the bottom, long pipes420 × 290 × 7020/25
T09.2450DrywallElectric water heater and washing machine, long, with electrical conduit for water heater, pipes exit at the bottom, long pipes420 × 1250 × 7020/25
T09.2455DrywallElectric water heater and washing machine, long, with electrical box, electrical conduit for water heater, pipes exit at the bottom, long pipes420 × 1250 × 7020/25
T09.2460DrywallDistrict heating cylinder, long, Thermograf, pipes exit at the bottom, long pipes420 × 1250 × 7020/25
T09.2465DrywallDistrict heating cylinder, long, Austria Email - FSN110/FSN140, pipes exit at the bottom, long pipes420 × 1275 × 7020/25
T09.2470DrywallDistrict heating cylinder, long, Austria Email - FSV110/FSV140, pipes exit at the bottom, long pipes420 × 1250 × 7020/25
T09.2475DrywallDistrict heating cylinder, long, Austria Email - FSV110/FSV140-2WZ, pipes exit at the bottom, long pipes420 × 1250 × 7020/25

For the electric cylinder

The boxes for the electric cylinder have two wall-plate elbows, 100 mm apart, an 87.5° DN 30 waste bend and an electrical conduit for the cylinder. In masonry they are 170 mm wide and 290 or 1250 mm high, in drywall 420 × 290 mm.

Electric cylinder and washing machine in one box

These versions have a third wall-plate elbow and, for the waste, a DN 40 trap bend in masonry and a DN 50 appliance trap in drywall. They are available with and without an electrical box.

For the district-heating cylinder

The boxes for district-heating cylinders measure 420 × 1250 mm, in drywall 420 × 1275 mm for FSN110/FSN140, and are matched to the cylinder: Thermograf or Austria Email FSN110/FSN140, FSV110/FSV140 and FSV110/FSV140-2WZ. They have five or six wall-plate elbows and a DN 40 or DN 50 trap bend, in drywall additionally an appliance trap.

In drywall all boxes sit with side fixing rails between the studs; the cylinder cross brace is available as an option (00192).

Pipe systems for the cylinder connection