Waste installation box single waste for the wall.
The waste installation box brings a single waste ready into the wall, without a water line: an XPS insulating body with a DN 50 waste for a trap bend or 87.5° bend, or with a built-in appliance trap HL 400 or HL 4000. SANOOX makes it in 6 versions for masonry and drywall.
Waste installation boxes for masonry and drywall
6 boxes · dimensions in mm, drawings schematicWhat is an installation box for the waste?
An XPS insulating body that brings a single DN 50 waste ready into the wall, without a water line. SANOOX makes it in 6 versions for masonry and drywall.
Which drain layout is prepared in the Waste installation box?
Ein trap bend or 87.5° bend DN 50. There are also boxes with a built-in Concealed trap HL 400 or HL 4000 or washing machine trap HL 400 or HL 4000, drain DN 50; which trap applies is fixed by the article number: as a suffix such as .HL400 or via a dedicated box number.
Does the waste box need a pipe system?
No. It carries no water line, so the article number is the box number; on M11.1580 the trap is added after it: M11.1580.HL400 or M11.1580.HL4000.
How deep is the waste installation box?
70 mm; 80 mm with the appliance trap HL 4000, in masonry also with HL 400.
Where do I order the Waste installation box?
Through your plumbing and heating merchant, using the full article number; SANOOX does not supply end customers. Build project lists in the configurator and send them to SANOOX as an enquiry.
Single waste: dimensions per box
| Box | Version | W × H × D (mm) | Drain |
|---|---|---|---|
| M11.1570Masonry | Drain, short, standard | 120 × 290 × 70 | DN50 trap bend or 87.5° bend |
| M11.1580.HL400Masonry | Drain, short, washing machine trap HL 400 | 140 × 290 × 80 | DN50 washing machine trap HL 400 |
| M11.1580.HL4000Masonry | Drain, short, washing machine trap HL 4000 | 140 × 290 × 80 | DN50 washing machine trap HL 4000 |
| T11.2520Drywall | Single drain, standard | 350 × 290 × 70 | DN50 trap bend or 87.5° bend |
| T11.2525Drywall | Single drain, washing machine trap HL 400 | 350 × 290 × 70 | DN50 washing machine trap HL 400 |
| T11.2830Drywall | Single drain, washing machine trap HL 4000 | 350 × 290 × 80 | DN50 washing machine trap HL 4000 |
Standard or with an appliance trap
The standard box has a DN 50 waste for a trap bend or 87.5° bend. The versions with an appliance trap bring the trap along: HL 400 or HL 4000.
In masonry the standard box is 120 mm wide and 70 mm deep, the boxes with an appliance trap are 140 mm wide and 80 mm deep.
Single waste in drywall
There are 3 versions for the stud wall, 350 mm wide, with side fixing rails: standard and appliance trap HL 400 with a depth of 70 mm, appliance trap HL 4000 with 80 mm.