EN
Configure
Data sheet

Urinal, long, Geberit rough-in set 116001, pipes exit at the bottom, long pipes, Masonry.

Model M08-0630 · drain DN50 trap bend 2″

Catalogue drawing Urinal, long, Geberit rough-in set 116001, pipes exit at the bottom, long pipes, Masonry (M08-0630) with dimensions
Key data
Width230 mm
Height1250 mm
Depth70 mm

Article numbers (selection)

First 48 of 186 combinations – full list in the configurator.

  • M08.0630.01.20.1
  • M08.0630.01.20.2
  • M08.0630.01.20.3
  • M08.0631.01.25.1
  • M08.0631.01.25.2
  • M08.0631.01.25.3
  • M08.0630.02.16.1
  • M08.0630.02.16.2
  • M08.0630.02.16.3
  • M08.0631.02.20.1
  • M08.0631.02.20.2
  • M08.0631.02.20.3
  • M08.0630.03.16.1
  • M08.0630.03.16.2
  • M08.0630.03.16.3
  • M08.0631.03.20.1
  • M08.0631.03.20.2
  • M08.0631.03.20.3
  • M08.0630.04.16.1
  • M08.0630.04.16.2
  • M08.0630.04.16.3
  • M08.0631.04.20.1
  • M08.0631.04.20.2
  • M08.0631.04.20.3
  • M08.0630.05.16.1
  • M08.0630.05.16.2
  • M08.0630.05.16.3
  • M08.0631.05.20.1
  • M08.0631.05.20.2
  • M08.0631.05.20.3
  • M08.0630.06.16.1
  • M08.0630.06.16.2
  • M08.0630.06.16.3
  • M08.0631.06.20.1
  • M08.0631.06.20.2
  • M08.0631.06.20.3
  • M08.0630.07.16.1
  • M08.0630.07.16.2
  • M08.0630.07.16.3
  • M08.0631.07.20.1
  • M08.0631.07.20.2
  • M08.0631.07.20.3
  • M08.0630.08.20.1
  • M08.0630.08.20.2
  • M08.0630.08.20.3
  • M08.0631.08.25.1
  • M08.0631.08.25.2
  • M08.0631.08.25.3

Compatible pipe systems

Aquatec, Aquapress, Connect Conel, Geberit Mepla schwarz, Geberit Mepla Therm, Geberit FlowFit, Haka, Harreither, Kelit Kelen, Kelit Kelox, Mainpex, Polysan, Prineto IVT, Radopress, Rehau Rautitan Flex, Rehau Rautitan Stabil, Roth Rohr, Sanipex, SIS, TECE Rohr, Uponor MLC, Viega Raxofix, Winkler MT, V&N Easytec, Pipetec IS Press, Multitherm Multipress, Rehau Fastloc, Comisa, Henco, TECE Logo, Valsir Pexal

Options

  • Insulation up to the pipe end (00198)