EN
Configure
Data sheet

Hand-wash basin, short, cold and hot water, pipes exit at the bottom, long pipes, Masonry.

Model M03-1040 · drain DN50 trap bend

Catalogue drawing Hand-wash basin, short, cold and hot water, pipes exit at the bottom, long pipes, Masonry (M03-1040) with dimensions
Key data
Width170 mm
Height290 mm
Depth70 mm

Article numbers (selection)

First 48 of 186 combinations – full list in the configurator.

  • M03.1040.01.20.1
  • M03.1040.01.20.2
  • M03.1040.01.20.3
  • M03.1041.01.25.1
  • M03.1041.01.25.2
  • M03.1041.01.25.3
  • M03.1040.02.16.1
  • M03.1040.02.16.2
  • M03.1040.02.16.3
  • M03.1041.02.20.1
  • M03.1041.02.20.2
  • M03.1041.02.20.3
  • M03.1040.03.16.1
  • M03.1040.03.16.2
  • M03.1040.03.16.3
  • M03.1041.03.20.1
  • M03.1041.03.20.2
  • M03.1041.03.20.3
  • M03.1040.04.16.1
  • M03.1040.04.16.2
  • M03.1040.04.16.3
  • M03.1041.04.20.1
  • M03.1041.04.20.2
  • M03.1041.04.20.3
  • M03.1040.05.16.1
  • M03.1040.05.16.2
  • M03.1040.05.16.3
  • M03.1041.05.20.1
  • M03.1041.05.20.2
  • M03.1041.05.20.3
  • M03.1040.06.16.1
  • M03.1040.06.16.2
  • M03.1040.06.16.3
  • M03.1041.06.20.1
  • M03.1041.06.20.2
  • M03.1041.06.20.3
  • M03.1040.07.16.1
  • M03.1040.07.16.2
  • M03.1040.07.16.3
  • M03.1041.07.20.1
  • M03.1041.07.20.2
  • M03.1041.07.20.3
  • M03.1040.08.20.1
  • M03.1040.08.20.2
  • M03.1040.08.20.3
  • M03.1041.08.25.1
  • M03.1041.08.25.2
  • M03.1041.08.25.3

Compatible pipe systems

Aquatec, Aquapress, Connect Conel, Geberit Mepla schwarz, Geberit Mepla Therm, Geberit FlowFit, Haka, Harreither, Kelit Kelen, Kelit Kelox, Mainpex, Polysan, Prineto IVT, Radopress, Rehau Rautitan Flex, Rehau Rautitan Stabil, Roth Rohr, Sanipex, SIS, TECE Rohr, Uponor MLC, Viega Raxofix, Winkler MT, V&N Easytec, Pipetec IS Press, Multitherm Multipress, Rehau Fastloc, Comisa, Henco, TECE Logo, Valsir Pexal

Options

  • Box depth 50 mm / drain DN40 (00199)
  • Insulation up to the pipe end (00198)
  • Brass protection plugs (00197)
  • Plastic protection plugs (00196)